Hydraulic Chain Cutter
-
Payment
-
Origin
China Mainland
-
Minimum Order
10
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Using methods and points for attention
1,,26-1, this series is used to cut off 42mm chain (chain) metals. When used according to the anchor chain (chain) diameter adjustment bolt, chain (chain) placed in perpendicular to the head ...
2, first fill the pump manually when using 32# anti-wear hydraulic oil and pump quick connector docking with the master cylinder, bi-directional pump with two hoses connected machines on two interfaces, attention when using the cutter head forward or backward direction, rotating reversing switch control of bi-directional pump head direction of advance and retreat.
3. empty before using several processes, departments and flexible movements, leakage-free to use.
4. when using null phenomenon, can loosen fuel screw on the pump body, pump body vertically up, head down hitting a few times, excluding air inside the pipe, and then tighten the screws, you can continue to use it.
5. when there is a load, do not remove quick connector to avoid accidents and damage to parts
6. check the oil: If oil not enough could not perform the machine performance. Some poor big exception is part of the oil is enough to produce.
7. After cutting, knife blade does not allow material. Otherwise head blocked the body damage.
8. the harder more ductile steel must calculate the maximum cutting force and the short head to fly out wounded men, be safe.
9. chronic lying, should be stored in a dry and no corrosive gas environment.
- Steel Wire Cutters 10 Pieces / (Min. Order)
- Torque Multiplier 10 Pieces / (Min. Order)
- Roof From The Level Indicator 10 Pieces / (Min. Order)
- KHYD310 Rock Drill 10 Pieces / (Min. Order)
- ZQSJ-90live Support Pneumatic Hand-held Drill 10 Pieces / (Min. Order)
- ZRS-50-420 Emulsion Hydraulic Drilling Rig 10 Pieces / (Min. Order)
- Pillar Type Hydraulic Rotary Drilling Rig 10 Pieces / (Min. Order)
- Coal Sludge Pumps 10 Pieces / (Min. Order)
- ZQST-40 Oxy Drilled 10 Pieces / (Min. Order)
- ZQS-30oxy Drilled 10 Pieces / (Min. Order)
- Steel Wire Cutters 10 Pieces / (Min. Order)
- Torque Multiplier 10 Pieces / (Min. Order)
- Roof From The Level Indicator 10 Pieces / (Min. Order)
- Pneumatic Digger 10 Pieces / (Min. Order)
- Pneumatic G7A 10 Pieces / (Min. Order)
- B87C Pneumatic Breaker 10 Pieces / (Min. Order)
- G20 Pneumatic Pick 10 Pieces / (Min. Order)
- TJ3 Pneumatic Mixer 10 Pieces / (Min. Order)
- MQT-130 Roof Bolter 10 Pieces / (Min. Order)
- MQS-50 Handheld Pneumatic Roofbolter 10 Pieces / (Min. Order)
- ZQS-50 Roof Bolter 10 Pieces / (Min. Order)
- Pneumatic Wrench 10 Pieces / (Min. Order)